According to the difference of electrolyte and separator, VRLA battery can be divided into AGM battery and GEL battery. AGM batteries mainly use AGM (glass fiber) separators, and the electrolyte is adsorbed in the pores of the separators. GEL batteries mainly use PVC SiO2 separators, and the electrolyte is a colloidal electrolyte that has been …
Valve-regulated sealed lead-acid (VRILA) battery is the most common battery used in solar street lamps. Its structure and working principle are introduced as follows. 1. Structure of VRLA battery The main components of VRLA battery are composed of positive plate, negative plate, separator, battery tank cover, sulfuric acid electrolyte, etc. (Figure 1). 2. The role …
Lead-acid batteries are mainly composed of positive and negative plate groups, separators, containers and electrolyte. (1) Polar plate. The positive and negative plates of lead-acid batteries are made of pure lead, and effective substances are directly formed on them; some pole plates are made of lead-nickel alloy grids and coated with effective substances. The effective …
The structure and working principle of lead-acid batteries Read More »
The voltage of the batteryThe nominal voltage of each cell of the battery is 2V, and the actual voltage varies with charging and discharging. At the end of charging, the voltage is 2.5~2.7V, and then it slowly drops to a steady state of about 2.05V. If the battery is used as the power source, the …
Classified according to the number of electrolytes and the structure of the battery tankAccording to the number of electrolytes and the structure of the battery tank, it can be divided into traditional open lead-acid batteries and valve-regulated sealed lead-acid batteries. The former is an open semi-sealed structure, the electrolyte is in a rich liquid state, …
The accumulator is a chemical power device that converts electrical energy into chemical energy through charging and stores it, and then converts chemical energy into electrical energy during use. It is made by immersing two separate electrodes in an electrolyte. The electrode made of the reducing substance is the negative electrode, and the electrode made …
The development history of sealed lead-acid batteries Read More »
The electrical characteristics of solar cell modules mainly refer to current-voltage characteristics, also known as I-V curves, as shown in Figure 2-22. The I-V curve can be measured according to the circuit device. The I-V curve shows the relationship between the current Im delivered through the solar cell module and the voltage Vm under a …
Electrical characteristics of solar cell modules Read More »
The solar cell is the smallest unit of photoelectric conversion, and the size is generally 4~100cm². The working voltage of a single solar cell is about 0.45~0.5V, and the working current is about 20~25mA/cm². Generally, it cannot be used as a power source alone. After the solar battery cells are connected in series and parallel …
According to the horizontal plane solar radiation data, using the mathematical models of different operation modes of the solar cell array above, the solar radiation received by the solar cell array can be calculated. Because the calculation process is very complicated, only a computer program can be compiled according to the mathematical model for calculation. …
The sun is a huge ball of hot gas, which is constantly undergoing thermonuclear reactions, thus releasing huge amounts of energy. The diameter of the sun is about 1.39 million kilometers, which is 109.3 times larger than the diameter of the earth. The volume of the sun is about 1.4122×107km3, which is 1.3 million times …